Other Salvaged DIY Materials at Revolve ReclaimedVinyl Billboard Tarps
- Sarah Miller

- Apr 28
- 2 min read
I'm looking for...
Reclaimed Wood
Billboard Tarps
Artificial Turf
Mantles
One of Revolve Reclaimed's most unique products: large vinyl tarps reclaimed from billboard structures. These are 3-ply vinyl with internal mesh reinforcement — far heavier and more durable than standard blue poly tarps.
Specs:
7 mil thick (vs. 5 mil for standard blue tarps)
100% waterproof
UV-resistant layer
Available sizes:
10 × 30 ft — $59 (200 available)
14 × 48 ft — $95 (300+ available)
Uses in Denver: hay and equipment covers on Colorado farms and ranches, pond liners, car covers and carports, firewood protection, lean-to shelters, yurts, tepees, roofing tarps during renovation, art projects, outdoor event canopies.
These tarps are exceptionally popular with Denver's maker and homesteader communities and with Colorado's ranching sector.
Salvaged Steel: Coal-Fired Panels and Cutout Sheets
Coal-fired COR-TEN steel panels from a decommissioned Colorado power plant. These 26–36-inch wide panels have extraordinary rust patina, no nail holes, and structural rigidity. Available at $3.50/sq ft. Used in Denver for:
Industrial accent walls in homes, restaurants, and breweries
Custom weld projects (COR-TEN is weldable)
Exterior cladding and privacy screens
Fireplace surrounds
Custom furniture bases
Steel cutout sheets — shapes punched from steel and aluminum as manufacturing by-products. Approximately 2 ft × 4 ft, in gauges from thin to ¼ inch. Priced at $15–$50 per sheet. Used for trellises, fencing, room dividers, and decorative panels.
Ultra Brackets — Floating Shelf and Mantel Hardware
Revolve Reclaimed retails Ultra Brackets — high-quality steel floating shelf and mantel brackets compatible with heavy reclaimed wood installations. Available in multiple sizes:
Mantel brackets: 58 inches long, 4-inch or 6-inch rods — $165
Shelf brackets: 22-inch (4-inch rods) — $65; 34-inch (6-inch rods) — $78
Many additional sizes available in-store.
Denver DIY Reclaimed Material Projects: Ideas and Inspiration
If you're a Denver builder, maker, or weekend DIYer, here are some project ideas using materials available at Revolve Reclaimed:
Under $200:
Barnwood accent wall in a small room (one bundle of 20 sq ft)
Floating reclaimed wood shelf with transit board + bracket
Industrial steel panel coffee table base (two cutout sheets)
Billboard tarp hay cover or equipment shelter
Commercial carpet tile floor in a small room
$200–$500:
Full barnwood bedroom accent wall (3–4 bundles)
Live edge side table (one slab + steel leg kit)
Reclaimed wood beam fireplace mantel (wind turbine beam + bracket)
Used turf dog run (1–2 rolls of Field 1 turf)
$500+:
Custom reclaimed dining table (live edge slab + legs, built by Revolve)
Full barnwood living room feature wall
Commercial carpet tile basement floor (large area)
Reclaimed beam ceiling installation




Comments