FIG. 040Specimen · In Stock
Cedar Tongue & Groove Siding
$18each
In Stock
Browse online · buy in person · cash, card or Bitcoin · we load with forklift ·720-236-0454 · Plan your visit
Last verified August 26, 2026 · inventory turns weekly, so call 720·236·0454 before you drive over
- Species
- Cedar
- Dimensions
- 1.5in × 5in · 8ft
- Age
- Weathered on a working fence line
- Reclaimed
- Goat farm fencing, rural southern Colorado
- Note
- Tongue and groove edges · 3.33 sq ft per board
| Item | Detail |
|---|---|
| Species | Cedar |
| Thickness | 1.5 in |
| Width | 5 in |
| Length | 8 ft |
| Coverage | 3.33 sq ft per board |
| Price | $18 each |
| Sold | By the board — no minimum |
Prices verified August 26, 2026 · call 720·236·0454 to confirm stock
Cedar tongue and groove siding, milled from fencing off a goat farm in rural southern Colorado. $18 a board — 1.5 inches thick, 5 inches wide, 8 feet long.
Why this cedar is worth having
This started life as fence board on a working ranch, which means it already carries years of Colorado sun and weather before it ever reached a mill. Rather than sell it as raw fence stock, it’s been milled tongue and groove — the interlocking edge that lets boards run tight and flat with no gaps, the same joint used on real exterior siding.
Dimensions
Every board is 1.5in × 5in × 8ft — 3.33 square feet of coverage per board. The tongue and groove edge means boards butt cleanly against each other with no shimming to keep a run flat.
What people build with it
Exterior siding and fence panels, interior accent walls, shed and outbuilding cladding, ceiling runs. The interlocking edge is what makes it siding rather than just board — it’s meant to go up as a running surface.
Before you install it
Brush the face down and check for embedded grit before it meets a blade — this lumber lived outdoors on a working fence line and picks things up. The weathered color is the whole reason to buy reclaimed cedar over new, so go easy on the sander.
Call 720-236-0454 to check what’s on the rack before you drive over.
FIG. 040.QQuestions
Cedar Tongue & Groove Siding — common questions
How much is the cedar tongue and groove siding?
$18 a board. Every board is cedar, 1.5 inches thick, 5 inches wide and 8 feet long — 3.33 square feet of coverage each. Sold by the board, no minimum and no cutting fee.
Where did this cedar come from?
It was fencing on a working goat farm in rural southern Colorado, milled tongue and groove for siding rather than left as raw fence board. It carries the color and grain variation of years outdoors on a ranch fence line.
What is tongue and groove siding good for?
The interlocking edge lets boards run tight and flat without gaps, which is what makes it work as exterior siding as well as interior accent walls, fence panels, shed and outbuilding cladding, and ceiling runs.
Does it need any prep before installing?
Brush it down and check for embedded grit before it meets a saw blade — fence lumber lives outdoors and picks things up. The weathered cedar tone is the reason to buy it, so sand sparingly if you want to keep it.
How many boards are available?
Call 720-236-0454 before you drive over and we will tell you what is on the rack that day.
When it's gone, it's gone.
Inventory turns over weekly. Call ahead, then pull your truck up — we load with the forklift.