FIG. 033Specimen · In Stock

Wind Turbine Transport Beams

$70–140per beam

In Stock

Browse online · buy in person · cash, card or Bitcoin · we load with forklift ·720-236-0454 · Plan your visit

Last verified August 13, 2026 · inventory turns weekly, so call 720·236·0454 before you drive over

  • Wind turbine transport beam finished as a floating shelf, torched grain raised across the face01 / 06
  • Wind turbine transport beam mounted as a floating mantel, deep torched texture along the length02 / 06
  • Wind turbine beam floating shelf against a plaster wall03 / 06
  • End view of a wind turbine transport beam shelf showing the section04 / 06
  • Wind turbine beam set as a mantel above a stone fireplace surround05 / 06
  • Wind turbine beam mantel above a linear fireplace and mounted television06 / 06
Species
Douglas Fir / White Pine
Dimensions
50in–10.5ft × 6in × 8in
Reclaimed
Vestas wind turbine transport, Brighton CO
CALCWorking out board feet or cut lists?Free shop calculator — feet, inches, sixteenths and millimetres. Opens right here.Open →
Shop CalculatorOpen full page ↗
Wind turbine transport beams
DimensionsSpeciesPrice
10.5ft × 6in × 8inDoug fir / white pine$140 each
50in × 6in × 8inDoug fir / white pine$70 each

Prices verified August 13, 2026 · call 720·236·0454 to confirm stock

These Douglas fir and white pine timbers were used to transport wind turbines for Vestas out of Brighton. Once the turbine gets where it is going, the cribbing is surplus — which means this is sound softwood that has barely been used.

10.5ft × 6in × 8in — $140 each. 50in × 6in × 8in — $70 each.

Why this is the cheap way into a beam

If you want the look of a heavy timber and you do not need a hundred years of patina, this is the least expensive 6×8 in the yard. Clean, straight, and sound.

What people build with them

Fireplace mantels, faux exposed beams, building and framing, raised beds, timber steps, and landscape edging. The 50-inch pieces are almost exactly mantel length as they sit.

Call 720-236-0454 to check stock.

FIG. 033.QQuestions

Wind Turbine Transport Beams — common questions

What are wind turbine transport beams?

They are heavy timbers used to crib and brace wind turbine components in transit — in this case for Vestas out of Brighton, Colorado. Once the turbine is delivered the timbers are surplus. The wood is sound and barely used, though we do not sell it as structural material.

How much do they cost?

The 10.5ft beams are $140 each and the 50in beams are $70 each. Both are 6 inches by 8 inches.

Are these good for outdoor landscaping?

Yes. At 6x8 they work well for raised beds, retaining edges, timber steps, and parking curbs. They are untreated, so for ground contact expect a normal service life for softwood.

When it's gone, it's gone.

Inventory turns over weekly. Call ahead, then pull your truck up — we load with the forklift.

Call 720-236-0454